Difference between revisions of "Tutorial Module06"

From TUFLOW FV Wiki
Jump to: navigation, search
(Created page with "=Tutorial Description= The TUFLOW Particle Tracking Module (PTM) allows the 2D or 3D simulation of discrete Lagrangian particles as they are transported by the flow field (or...")
 
Line 10: Line 10:
 
<li> [[Tutorial_Module06#Initial_2D_model_.28HYD_000.29 | Add deposition and erosion to the particles to allow them to interact with the bed]]
 
<li> [[Tutorial_Module06#Initial_2D_model_.28HYD_000.29 | Add deposition and erosion to the particles to allow them to interact with the bed]]
 
<br><br>
 
<br><br>
 +
 +
For the purposes of the particle tracking tutorial, we'll be using the hydrodynamic model created in [[Tutorial Module05|Tutorial Module 5 (Estuary Application)]] and supplementing with additional information to represent the particles.
 +
 +
=Setup a Point Source of a Group of Particles=
 +
 +
The first step in the TUFLOW FV particle tracking module is to generate an .fvptm file which defines the commands to define particle characteristics and processes.  This .fvptm file is then referenced via the TUFLOW FV control file (.fvc).
 +
 +
* Use notepad++ to create a new file with extension .fvptm.  Name the file PT_000.
 +
* Add the following commands to define a group of particles representing microplastics which enter our model via a combined sewer overflow within our eastuarine reach and can flow out of the model at the downstream tidal boundary.
 +
 +
<font color="blue"><tt>Initial</tt></font> Temperature<font color="red"><tt> == </tt></font><tt>20.</tt>

Revision as of 19:15, 3 July 2020

Tutorial Description

The TUFLOW Particle Tracking Module (PTM) allows the 2D or 3D simulation of discrete Lagrangian particles as they are transported by the flow field (or other drivers such as wind). Particle behavior such as settling, buoyancy, decay, sedimentation and re-suspension can all be simulated. The tracking of discrete particles can be used to output particle fate and age, which is useful for purposes of animal migration, search and rescue, environmental contaminants and oil spill modelling.

The PTM is invoked through the TUFLOW FV hydrodynamic engine which controls the overall simulation and supplies the hydrodynamic forcing to the particle transport module.

The tutorial will cover a number of aspects of the particle tracking model:

  • Add a single set of particles via a point source and simulate their fate
  • Review the outputs using the QGIS TUFLOW Viewer plugin
  • Add additional groups of particles via a polygon source
  • Add deposition and erosion to the particles to allow them to interact with the bed

    For the purposes of the particle tracking tutorial, we'll be using the hydrodynamic model created in Tutorial Module 5 (Estuary Application) and supplementing with additional information to represent the particles.

    Setup a Point Source of a Group of Particles

    The first step in the TUFLOW FV particle tracking module is to generate an .fvptm file which defines the commands to define particle characteristics and processes. This .fvptm file is then referenced via the TUFLOW FV control file (.fvc).

    • Use notepad++ to create a new file with extension .fvptm. Name the file PT_000.
    • Add the following commands to define a group of particles representing microplastics which enter our model via a combined sewer overflow within our eastuarine reach and can flow out of the model at the downstream tidal boundary.
    Initial Temperature == 20.